1988 Ford Taurus 3.8 V6, auto with OD. The engine almost always runs without issues when driving, or when stopped with the transmission in drive or reverse. The second the transmission is shifted into neutral or park, the engine increases in RPM’s and then drops off. This cycle usually continues until the engine stops running. Sometimes it recovers and idles for a few seconds, then returns to the fluctuating RPM situation. With the transmission in park or neutral, the RPM’s fluctuate, if you put the transmission in reverse or drive, the engine usually recovers and runs at a steady continuous RPM. If the trany is shifted back into neutral or park, the RPM fluctuation starts all over again. This issue has mostly if not always occurred when the engine is at its normal operating temp. There have only been a few time this occurred with the transmission in drive. Does anyone have any suggestions or experience with this type of issue?

I retrieved code 332 from a 1994 Ford Taurus 3.0 and was wondering what does it mean….and how to fix and pinpoint what’s wrong….

I have a 1993 Ford Taurus 3.0. It will not start, it turns over fine. I checked my spark and was getting no spark to any of my plugs. I then removed my distributor cap, and the distributor does not turn with the engine is turning over. Timing chain??? Does this sound right, also do I need to pull the whole motor? Thanks for any help or advice.

i need a diagram to replace a serpentine belt on a 2001 ford taurus 3.0 without having to pay for it online

I have a 1993 Ford Taurus 3.8L. I need to replace the oil pressure switch but can't find it.

Can someone please tell me where it is. If you have a picture that would be even better. Thanks.