Comments on: My 2007 Ford Taurus Blinker/Turn Signal Acting Funny …..?

By: Rick

Rick — Thu, 14 Jan 2010 15:13:10 +0000

I guess you have to take out the three bolts that are located inside the trunk and behind the covering. Once you take those three bolts out the tail light comes out and the bulbs can be replaced that way. Another one for the books.

By: Rick

Rick — Wed, 13 Jan 2010 15:17:39 +0000

My problem lies in how to take the light assembley out of the rear right housing. It used to be you twisted it a quarter degree on way and it would come out. Now they have like a big plastic half ball type of housing, and I’m afraid pulling out too hard will break something. I can do everything but get to the bulb. Please help!!

By: Maha

Maha — Mon, 23 Nov 2009 00:13:10 +0000

Sounds like one of two things. First try replacing the turn signal bulb. Most likely its getting time to replace it. Also check the fuses but more then likely it is the bulb Good luck!

By: hollifieldrobert

hollifieldrobert — Mon, 23 Nov 2009 00:13:10 +0000

one of your left bulbs is burned out either frt or back probally back

By: Alfonzo

Alfonzo — Mon, 23 Nov 2009 00:13:10 +0000

you got 2 different (manufacturers) bulbs in your signal lens, either front or back.
That little bit of difference in electrical resistance will make the light blink quicker.
If it really bothers you THAT much, you can change all the signal bulbs with bulbs of the same type (manufacturer,lot #)