The engine, transmission and subframe are dropped as a unit then pulled apart when on the ground. I hate them. If you are not a pro, you aint gonna do it. Just getting the exaust off it will make you change your mind about trying it yourself
It’s pretty easy. The engine can be removed from the top with a normal engine hoist, and you can’t install any of the wiring connectors incorrectly, because they all go in one way, to only the connector they mate with. You’ll have to remove the crank pulley, and maybe the water pump pulley as well.
10.5 to 14.5 depending on the replacement engine
The engine, transmission and subframe are dropped as a unit then pulled apart when on the ground. I hate them. If you are not a pro, you aint gonna do it. Just getting the exaust off it will make you change your mind about trying it yourself
pleas don’t torture a mechanic with a tortus but if you must 12 -14 hr labor at $80-!00 an hr ….buy another car. unless you are in love.
It’s pretty easy. The engine can be removed from the top with a normal engine hoist, and you can’t install any of the wiring connectors incorrectly, because they all go in one way, to only the connector they mate with. You’ll have to remove the crank pulley, and maybe the water pump pulley as well.