http://taurusanswers.com/how-do-i-program-a-1999-ford-taurus-keyness-entry-remote.html Thu, 09 Feb 2012 02:58:01 +0000 http://wordpress.org/?v=2.7.1 hourly 1 http://taurusanswers.com/how-do-i-program-a-1999-ford-taurus-keyness-entry-remote.html/comment-page-1#comment-1856 Ford Girl Sun, 08 Nov 2009 07:06:48 +0000 http://taurusanswers.com/how-do-i-program-a-1999-ford-taurus-keyness-entry-remote.html#comment-1856 Cycle the ignition key from OFF to RUN a total of EIGHT times, ending with the ignition key in the RUN position (the same position the key is in when the engine is running, but NOT running). Your locks will respond by locking and unlocking, indicating that it is in "programming mode". Have ALL remotes handy. Press any button on one of the remotes, and wait for the locks to respond. Press any button and ANOTHER remote, again waiting for the locks to respond. Press any one button on the NEW remote, and again wait for the locks to respond. Turn the ignition key to the OFF or LOCK position. The locks should cycle again, indicating it has exited the "programming mode". Try each remote to verify that it works. Hope this helps. Cycle the ignition key from OFF to RUN a total of EIGHT times, ending with the ignition key in the RUN position (the same position the key is in when the engine is running, but NOT running). Your locks will respond by locking and unlocking, indicating that it is in "programming mode". Have ALL remotes handy. Press any button on one of the remotes, and wait for the locks to respond. Press any button and ANOTHER remote, again waiting for the locks to respond. Press any one button on the NEW remote, and again wait for the locks to respond. Turn the ignition key to the OFF or LOCK position. The locks should cycle again, indicating it has exited the "programming mode". Try each remote to verify that it works. Hope this helps.

]]>